Produse pentru • i (151)

Features Low-speed rotating nozzles for tanks/containers cleaning. Rotation of 5–10 rpm at 0.3 MPa (ca. 3 bar). Maximized contact time between cleaning object and spray liquid achieves higher cleaning effect. High heat-resistant. Applications Cleaning of tanks, containers, filling machines, and conveyors Pipe conn. size:Rc 1/8" – Rc 3/4" Rated pressure:0.15–1.0 MPa (ca. 1.5 - 10 bar) Spray capacity:9.19–274 ℓ/min Reach distance:- Cleaning distance:- Max. allowable temperature:150℃ (300°F)

Features High impact solid stream of air flown from eight holes. Compact design, lightweight. Quiet operation with noise level reduced by more than 10 dB (A) compared to conventional one-hole air nozzle. Max. allowable temperature: [Plastic] 60℃ (140 °F), [Stainless steel] 400℃ (750 °F). Applications Blow-off drying: Blow-off drying for engine block Blowing off: Rejection of inferior products Cooling: Pinpoint cooling for molded plastic Spray pattern:Flat Pipe conn. size:R 1/8"- R 1/4" Standard pressure:- Spray angle:- Spray capacity:- Supply air type:Compressed air

T – 601 is a great collector which has excellent selectivity characteristics in the right conditions compared to that of SHA or SalicylHydroxamic Acid. It has the ability to form chemically stable chelate with copper, tin, iron, various rare earth minerals, copper, tungsten, and many more. But with alkali and earth metals, the T – 601 forms unstable chelate. Nitrogen % ≥:3.5% Expiry Date:1 year or 12 months

Outside dimensions: 400l x 300b x 200h mm Inner dimensions: 330l x 230b x 140h mm Wall thickness: 35 mm Materiaal: Polystyrene 100 Our EPS, commonly called polystyrene boxes, cooling boxes, Isomo, Tempex, Styropor and Depron are extremely suitable for sending your products chilled or frozen. Our EPS boxes also protect your products. The EPS boxes have a very good insulation value and are also reusable. EAN:9509516466238 Outside dimensions:400l x 300b x 200h mm Inner size:330l x 230b x 140h mm Wall thickness:35 mm Material:Polystyrene 100

Features Long flat air nozzle with 100 mm–1,400 mm in spray width. 13 spray width types are available. Max. allowable temperature: 400℃ (750 °F) Applications Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block Blowing off dust/paint dust/debris, Blowing off inferior products (rejection of inferior products) Cooling: Pinpoint cooling for molded plastic Others: Detachment, Cleaning, etc. Spray pattern:Flat Pipe conn. size:R 1/2" - R 1*1/2" Standard pressure:- Spray angle:- Spray capacity:- Supply air type:Compressed air

Features Ultra-small capacity hollow cone spray nozzle with the finest atomization among hydraulic nozzles. Capable of generating extremely fine spray. The whirl chamber is formed by a ceramic orifice and closer, which provides excellent wear resistance. Applications Humidifying: Air handling units, green houses Cooling: Gas, thin plates, poultry Spraying: Alcohol, chemicals Pipe conn. size:R 1/4" Spray angle:60-80° Mean droplet diameter:45–210 μm Strainer:Included or available Standard pressure:0.7 MPa (ca. 7 bar) Spray capacity:2.00–107 ℓ/hr Air Consumption:- Free passage diameter:0.15–0.60 mm

Sodium Thioglycolate or Sodium Mercaptoacetate is a mining separator which is used mainly in the separation process of copper and molybdenum copper sulfide. It also acts as a galena inhibitor. It is also known as a powerful and effective depressant agent for copper sulfide which has gone through the separation process during considerable environment conditions. Great results are seen when this is used as a depressant instead of using sodium cyanide or sodium sulfide. pH Value:7 - 11 Density:1.32 g / cm3 Chemical Formula:HSCH2COONa

Features Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa (ca. 1 bar – 3 bar). Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio). Spray angle of 110 °, 80 °, or 45 °. *1) Spray angle measured at compressed air pressure of 0.3 MPa (ca. 3 bar) and liquid pressure of 0.1 MPa (1 bar). *2) Free passage diameter of nozzle orifice. *3) Measured by Laser Doppler Method. Applications Spraying, Cooling, Moisture control, Cleaning, Dust suppression, etc. Thread standard:- Pipe conn. size:- Standard pressure:- Spray angle:45°, 80°, or 110° (*1) Spray capacity:1.0–107 ℓ/hr Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:20–100 μm Air Consumption:7–245 ℓ/min, Normal Air pressure:0.2–0.4 MPa (ca. 2 bar - 4 bar) Free passage diameter:0.2–1.6 mm (*2)

Our Thermo bags work perfectly for shipments of refrigerated and frozen products. Our covers are water resistant, heat reflective and recyclable. The bags are easy to use and to place in a box and take up little space in your warehouse in volume. The bags are 75 cm high x 75 cm wide and 8 mm thick

Tetraethylenepentamine – TEPA, similar in appearance to most amines, is not colourless but has the appearance of a yellow coloured liquid. It is a somewhat viscous liquid. It is soluble in many polar solvents. It is slightly less dense than water. Its vapours are heavier than air Boiling Point:340 °C(lit) Purity:99% Density:0.998 g/mL at 25 °C(lit) Vapour Density:6.53 (vs air) Flash Point:365 °F

Features Allows adjustment of spray direction over a range of 50 degrees as desired. [Metal type] Withstands pressure design. Available from 1/8″ to 3/4″ in pipe connection sizes. Use UT-S303 (stainless steel 303) at pressure under 15 MPa (ca. 150 bar), UT-B (brass) under 4 MPa (ca. 40 bar). [Plastic type] Lightweight, high seal performance. Spray direction is adjustable while spraying (up to 0.3 MPa, ca. 3 bar). Use UT-FRPP at pressure under 1 MPa (ca. 10 bar, at room temperature). Cautions for both types: Do not use under conditions where water hammer or sudden change of water pressure occurs. For use with KB and KKBP series nozzles, a different type of UT Ball Joints are required. Inquire with us for details. Applications Accurate nozzle alignment is possible after connected to a pipe. Where large changes in spray direction are required depending on nozzle application such as cleaning and air blowing. Main material:Stainless steel 303, Brass, or Glass-fiber reinforced PP (FRPP)

Features Flat spray pattern with uniform distribution throughout pattern area. Even spray impact across the entire spray area. Applications Cleaning: Automotive, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection, heat protection, dust suppression, deodorization Pipe conn. size:R1/8" - R1/2" Spray angle:15-115° Mean droplet diameter:140–1,250 μm Strainer:Available for some nozzle codes Standard pressure:0.3 MPa (ca. 3 bar) Spray capacity:0.30–46.9 ℓ/min Air Consumption:- Free passage diameter:0.2–5.8 mm

Clamp made out of a pre-rolled plate of stainless steel AISI 304. Design with welded AISI 304 studs and fingers (50 mm center to center). Clamp is completely pickled and passivated after welding. Studs are Teflon coated to prevent cold welding (galling). Stainless steel nuts made out of A4 quality. Gasket of NBR rubber with waffle structure and rounded tops. Spanner plate is completely vulcanized with rubber gasket. Diameter reach of single band repair clamp is max. 12 mm (depends on diameter pipe). Clamps available in different diameters: DN 40 up to DN 350. Clamps available in different lenghts: 100, 150, 200, 250, 300, 400, 500 and 600 mm (other lengths on request). Indication pressure class for (waste)water: 24 bar for DN 40 up to DN 150, 16 bar for DN 175 up to DN 300 and 10 bar for DN 350. Indication pressure class for gas: 6 bar for DN 40 up to DN 150, 4 bar for DN 175 up to DN 300 and 3 bar for DN 350. Studs protected with plastic protection caps.

Repair coupling with two locks provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 15-1000 Progressive sealing Available in different lenghts from 60 up to 150 mm (2.4″ to 5.9″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range PN 7-42 (Bar) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight

Features Capable of generating wide-angle flat spray even at low liquid pressure. Clog-resistant Spray direction is 75° to the nozzle axis. Applications Cleaning: Conveyor belts, film, eliminator plates, plate glass, planks Foam breaking: Wastewater treatment, paper manufacturers Cooling: Conveyor belts, roofs, tanks Water screen: Fire protection, heat protection, deodorization Pipe conn. size: R 1/8"- R 1" Spray angle:115-140° Mean droplet diameter:190–1,550 μm Strainer:Available for some nozzle codes Standard pressure:0.15 MPa (ca. 1.5 bar) Spray capacity:0.30–250 ℓ/min Air Consumption:- Free passage diameter:0.6–18.5 mm

Features Easy installation and removal by just attaching a nozzle to this connector. Quick-detachable design helps to greatly reduce maintenance time. Easy mounting/dismounting with a knurled tab. Made of high chemical and heat resistant plastic (compared to PVC). Nozzle connector thread size is Rc 1/8″ or Rc 1/4″. Note: The upper-left photo is INCO with a wide-angle flat spray nozzle YYP series. Applications Cleaning Etching Stripping For the applications where precise spray alignment and/or periodic maintenance is required Quick-detachable nozzle connectors with thread size Rc1/8 or Rc1/4 Main material:PP, PPS

N – Butyl Vinyl Ether or Butyl Vinyl Ether is a special reagent used in reactions of organic chemicals and in the preparation of various pharmaceutical compounds which are used in therapies against cancer. Another application of Butyl Vinyl Ether is in the synthesis of strong inhibitors for PDE5. Ethyl Vinyl Ether % ≥:98 % Boiling Point:94°C Melting Point:-113° C Density:0.774 g/mL Chemical Formula:C6H12O

Features Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*3). Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa (ca. 1 bar – 3 bar). Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio). Spray angle of 110 °, 80 °, or 45 °. *1) Spray angle measured at compressed air pressure of 0.3 MPa (ca. 3 bar) and liquid pressure of 0.1 MPa (ca. 1 bar). *2) Free passage diameter of nozzle orifice. *3) Measured by Laser Doppler Method. Applications Spraying, Cooling, Moisture control, Cleaning, Dust suppression, etc. Thread standard:- Pipe conn. size:M3 depth 2 Standard pressure:- Spray angle:45°, 80°, or 110° (*1) Spray capacity:0.25–38.5 ℓ/hr Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:20–100 μm Air Consumption:2.6–91 ℓ/min, Normal Air pressure:0.2–0.4 MPa (ca. 2 bar - 4 bar) Free passage diameter:0.2–0.9 mm (*2)

1.4 – Butanediol Monovinyl Ether or 4 – Hydroxybutyl Vinyl Ether is a specialty chemical which has a wide range of applications. One of these is its usage as a reactive diluent for coatings which are cured through radiation. Molecular Weight:116.16 g / mol Chemical Formula:C6H12O2

Hinge type repair coupling provides a repair solution for all pipes that needs to be repaired permanently or temporarily.Available in DN 15-600 Progressive sealing Available in different lenghts from 60 up to 150 mm (2.4″ to 5.9″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 OSU) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight

Features Low-pressure type rotating nozzle. Solid stream jet provides high cleaning performance. As the nozzle part is movable, it is easy to insert into and eject from a tank or equipment. Compact design allows for installation in a tank with a small inlet. *1) Spray capacity for each model: RJ3-2-Φ7: 103 L/min (at 0.3 MPa, ca. 3 bar)–169 L/min (at 0.8 MPa, ca. 8 bar) RJ3-2-Φ8: 127 L/min (at 0.3 MPa, ca. 3 bar)–207 L/min (at 0.8 MPa, ca. 8 bar) RJ3-4-Φ6: 146 L/min (at 0.3 MPa, ca. 3 bar)–239 L/min (at 0.8 MPa, ca. 8 bar) *2) Reach distance of RJ3-4-Φ6 is approx. 9 meter in radius. Applications Cleaning of tanks, chests, and containers, cleaning inside the chests (material tanks of papermaking) Pipe conn. size:Rc 1*1/2 Rated pressure:0.3–0.8 MPa (ca. 3 - 8 bar) Spray capacity:103–239 ℓ/min (*1) Reach distance:Approx. 10 m in radius (*2) Cleaning distance:- Max. allowable temperature:80°C (176°F)

Features Pneumatic slit-laminar nozzle with uniform spray distribution throughout the entire spray pattern area. While multiple-nozzle alignment of conventional pneumatic spray nozzles leaves some spots unwashed, PSN nozzles provide uniform spray distribution and achieve a complete cleaning, leaving no spot unwashed. PSN can be used at a short distance. *1) Measured at compressed air pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) and liquid pressure of 0.1–0.4 MPa (ca . 1 bar – 4 bar) for PSN nozzle with slit length of 1000 mm and slit opening of 0.05 mm. Applications Cleaning: Glass substrate, liquid crystal Cooling: Steel plates, moldings Moisture control: Paper, cardboard [Steel making industry] Surface finish process: Precision cleaning for steel surface treatment, Roll cleaning Thread standard:- Pipe conn. size:Rc 3/8" Standard pressure:- Spray angle:- Spray capacity:8.0–28.0 ℓ/min (*1) Supply air type:Compressed air Liquid feeding system:Liquid pressure Mean droplet diameter:- Air Consumption:520–1,700 ℓ/min, Normal (*1) Air pressure:- Free passage diameter:-

Repair coupling for elbows (only for long radius elbows, R >= 1.5D), bends or weld provides a repair solution for all pipesthat needs to be repaired permanently or temporarily. Available in DN 13-500 Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 53 bar (769 PSI) depending on size Main components of stainless steel 316 Green PTFE coated bolts Light weight

Repair coupling with two locks provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 15-1000 Progressive sealing Available in different lenghts from 60 up to 150 mm (2.4″ to 5.9″) Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range PN 7-42 (Bar) depending on size Made of stainless steel 316 Green PTFE coated bolts Light weight

Sodium Thioglycolate or Sodium Mercaptoacetate is a mining separator which is used mainly in the separation process of copper and molybdenum copper sulfide. It also acts as a galena inhibitor. It is also known as a powerful and effective depressant agent for copper sulfide which has gone through the separation process during considerable environment conditions. Great results are seen when this is used as a depressant instead of using sodium cyanide or sodium sulfide. pH Value:7 - 11 Density:1.32 g / cm3 Chemical Formula:HSCH2COONa

Grip type coupling provides a tensile / axial restraint connection for all metal pipes, allows pipe section replacement, suitable for high pressure, and is available in DN 15-400 Easy installation by use of a torque wrench, limited space required for installation due to compact design Pressure range up to 42,7 bar (620 PSI) depending on size Progressive sealing and anchoring Max. angular deflection 5° for DN 15-50, 4° for DN 65-175 and 2° for DN >= 200 Main components of stainless steel 316 Green PTFE coated bolts Light weight, appr. 30% in comparison with flanged connections 60% noise reduction compared to rigid connections

Features Full cone spray pattern with a round impact area and uniform distribution. Unique design to produce fine atomization by liquid impinging inside chamber without a whirler. No-whirler design with large free passage diameter minimizes clogging. Spraying axis 90ﾟ from the axis of the nozzle inlet. For spraying chemicals such as hydrochloric acid, PPS-injection molded AJP are available for excellent chemical and heat resistance. Applications Cleaning: Pre-painting treatment, washing booths, machine parts, gas, incinerator fumes Cooling: Steel plates, copper pieces, gas Spraying: Aeration, foam breaking Others: Applications where re-circulated water is being used or clogging is a concern Pipe conn. size:R 1/8" -R 1*1/2" Spray angle:75-90° Mean droplet diameter:640–1,400 μm Strainer:Not included Standard pressure:0.2 MPa (ca. 2 bar), 0.35 MPa (ca. 3.5 bar) Spray capacity:2.00–250 ℓ/min Air Consumption:- Free passage diameter:1.6–22.3 mm

Repair coupling for elbows (only for long radius elbows, R >= 1.5D), bends or weld provides a repair solution for all pipes that needs to be repaired permanently or temporarily. Available in DN 13-500 Easy installation by use of a teorque wrench, limited space required for installation due to compact design Pressure range up to 53 bar (769 PSI) depending on size Main components of stainless steel 316 Green PTFE coated bolts Light weight

Methyl Isobutyl Carbinol or 4 – Methyl – 2 – Pentanol is a kind of chemical compound which is organic and is derived from acetone. In the mining industry, MIBC is popularly used as a frothing agent during the flotation processes of different minerals and also when producing additives of lubricant oils. Compared to other frothing agents, MIBC has a great selectivity and fast kinetics in the flotation process. It produces froths with are dry yet easy to break which increases the efficiency and yield of the mineral. Mosisture % ≤:0.1% Acidity % ≤:0.005 Density g/ml ≥:0.805 g / cm3 Expiry Date:12 months

Ethylene Glycol Monovinyl Ether or 2 – Vinyloxyethanol has a wide range applications in the industry. One of which is that it is used as a polymer used in various products like coatings, lacquers, and surgical adhesives. It is also used as a modifier for polystyrene and alkyd resins. Another application is as a plasticizer for nitrocellulose and other kinds of plastics. Ethyl Vinyl Ether % ≥:97 % Boiling Point:143°C Melting Point:49°C Density:0.982 g/mL Chemical Formula:C4H8O2